排序方式: 共有50条查询结果,搜索用时 187 毫秒
1.
脐带缆螺旋滑移分析及力学性能研究 总被引:1,自引:0,他引:1
针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。 相似文献
2.
介绍了Ekman螺线的动力学结构 ,分析研究了风应力及海水内部的动量传递形式 .结果表明 :动量传递方向与海流方向成 45°左偏 .这对于研究海洋内部的动力结构是有意义的 . 相似文献
3.
Flow processes and sedimentation in unidirectionally migrating deep‐water channels: From a three‐dimensional seismic perspective 下载免费PDF全文
Chenglin Gong Yingmin Wang Ronald J. Steel Jeff Peakall Xiaoming Zhao Qiliang Sun 《Sedimentology》2016,63(3):645-661
Three‐dimensional seismic data were used to infer how bottom currents control unidirectional channel migration. Bottom currents flowing towards the steep bank would deflect the upper part of sediment gravity flows at an orientation of 1° to 11° to the steep bank, yielding a helical flow circulation consisting of a faster near‐surface flow towards the steep bank and a slower basal return flow towards the gentle bank. This helical flow model is evidenced by the occurrence of bigger, muddier (suggested by low‐amplitude seismic reflections) lateral accretion deposits and gentle channel wall with downlap terminations on the gentle bank and by smaller, sandier (indicated by high‐amplitude seismic reflectors) channel fills and steep channel walls with truncation terminations on the steep bank. This helical flow circulation promotes asymmetrical depositional patterns with dipping accretion sets restricted to the gentle bank, which restricts the development of sinuosity and yields unidirectional channel migration. These results aid in obtaining a complete picture of flow processes and sedimentation in submarine channels. 相似文献
4.
Abstract A two-dimensional, nonlinear, time-dependent, non-hydrostatic, anelastic, numerical model is used to assess the effect of condensation on the evolution and structure of gravity waves generated by the passage of a stable, moist stream over topography. Precipation is ignored but water phase changes are taken into account explicitly. The main effect of condensation is to damp the wave intensity and to reduce the wave drag, which can be diminished by as much as 50% compared to its value in dry simulations. This result agrees with some earlier analytical models and some more recent fully compressible numerical models. This model also confirms that the presence of condensation delays the overturning of isentropes, and the formation of the critical layer that accompanies wave-breaking. 相似文献
5.
An experimental investigation was conducted on a flexible riser with and without various strake arrangements. The aim of the present work was to further improve the understanding of the response performance of the vortex-induced vibration (VIV) of a riser with helical strakes. Two current profiles, including uniform and linearly sheared flows, were simulated. The uniform current was simulated by towing the riser model in one direction using the towing carriage, and the linearly sheared current was simulated by fixing one end of the riser and using a driven cantilever to traverse a circular arc. Based on the modal superposition method, the displacement responses were obtained from the measured strain. Strakes with different heights and pitches were analysed, and response parameters such as the displacement response and fatigue damage were studied. The results of the bare model test show that the lock-in phenomenon displays multi-order characteristics, and the VIV displacement decreases with an increased order of the lock-in regime. The results of the straked model test indicate that the response characteristics of a bare riser can be quite distinct from those of a riser with helical strakes, and the response performance depends closely on the geometry of the strake configuration. 相似文献
6.
Experimental Study on Response Performance of VIV of A Flexible Riser
with Helical Strakes 总被引:1,自引:1,他引:0
Laboratory tests were conducted on a flexible riser with and without helical strakes. The aim of the present work is to further understand the response performance of the vortex induced vibration (VIV) for a riser with helical strakes. The experiment was accomplished in the towing tank and the relative current was simulated by towing a flexible riser in one direction. Based on the modal analysis method, the displacement responses can be obtained by the measured strain. The strakes with different heights are analyzed here, and the response parameters like strain response and displacement response are studied. The experimental results show that the in-line (IL) response is as important as the cross-flow (CF) response, however, many industrial analysis methods usually ignore the IL response due to VIV. The results also indicate that the response characteristics of a bare riser can be quite distinct from that of a riser with helical strakes, and the response performance depends on the geometry on the helical strakes closely. The fatigue damage is further discussed and the results show that the fatigue damage in the CF direction is of the same order as that in the IL direction for the bare riser. However, for the riser with helical strakes, the fatigue damage in the CF direction is much smaller than that in the IL direction. 相似文献
7.
Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles. 相似文献
8.
9.
目的:探讨64排螺旋CT对胫骨平台隐匿性骨折的诊断价值及临床意义。方法:收集2008年1月至2011年12月连续21例门急诊下肢外伤后普通X线平片表现为阴性及可疑骨折,64排螺旋CT检查确诊为胫骨平台骨折患者影像资料,并重新采用多层面重建(MPR);容积显示(VR)和最大灰度重建(MIP)等多种后处理技术进行回顾性分析。结果:MDCT3D共显示SchatzkerⅠ型10例;Ⅱd型4例;Ⅲ3例;Ⅳ型2例;Ⅳ型1例和Ⅴ型1例。结论:64排螺旋CT联合应用多种重建技术对胫骨平台隐匿性骨折的评价是可靠和准确的。可以准确评估21例胫骨平台骨折的部位、类型、程度及并发症等。明显提高了诊断准确性,避免了普通平片对胫骨平台隐匿性骨折的漏诊及误诊。可为临床采取及时有效的治疗提供更准确、更丰富的诊断信息。 相似文献
10.
本文主要介绍了关于新型的锥束CT重建算法——Katsevich算法。首先描述了如何引入Katsevich重建公式,同时介绍了Tam-Dannielson窗口和PI线的一系列与其他重建算法不同的重建方式,指出反投影过程与Feldkamp重建算法的反投影过程是一样的。我们可以利用这个重建算法有效地进行锥束螺旋CT重建,并得到效果理想的图像。我们也可以设计相应的并行算法,便于分析这些算法的复杂度,如:分析算法时间并且采用并行算法加快运行速度。这个方法也可以被用来改进成为其他重建公式(例如Zou和Pan的BPF型反转公式)。 相似文献